Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pipe thread sealant
- Tape measure
Step-by-Step Installation
- Choose Installation Location: Select a location with proper ventilation and adequate clearance from combustible materials.
- Remove Packaging Materials: Remove all protective films, tapes, and packaging materials from the stove surface.
- Gas Connection: Connect gas supply line using approved gas connector. Apply pipe thread sealant to all connections.
- Electrical Connection: Connect to a properly grounded 120V, 60Hz outlet. Ensure proper grounding for electronic ignition system.
- Anti-tip Bracket Installation: Install and secure anti-tip bracket to floor or wall as per instructions to prevent tipping.
- Level the Stove: Adjust leveling legs to ensure the stove is perfectly level from front to back and side to side.
- Leak Test: Test all gas connections for leaks using soapy water solution. Bubbles indicate leaks that must be fixed.
- Test Operation: Test all burners and oven functions to ensure proper operation before regular use.
Specifications
| Model Series | NX58H9500WS |
| Type | 5-Burner Gas Range |
| Color | Stainless Steel / Black |
| Burner Configuration | 5 Sealed Burners |
| Burner Output | 18,000 BTU (Power Burner) |
| Oven Capacity | 5.8 cu. ft. |
| Control Type | Knob Controls with Digital Display |
| Ignition System | Electronic Ignition |
| Grill Option | Optional Grill/Griddle |
| Power Requirements | 120V, 60Hz, 15A |
| Dimensions (HxWxD) | 36 x 30 x 28 inches |
| Weight | 145 lbs |
Warranty Information
- Full Warranty: 1 year parts and labor
- Burner Warranty: 5 years on sealed burners
- Additional Coverage: Optional extended warranty available
For warranty service, contact Samsung Customer Service at 1-800-726-7864 or visit Samsung.com
Key Features
Power Burner
18,000 BTU power burner provides intense heat for rapid boiling and high-temperature cooking, perfect for stir-frying and searing.
Sealed Burners
Fully sealed burners prevent spills from reaching internal components, making cleanup easier and improving safety during cooking.
Convection Oven
The convection system circulates hot air evenly throughout the oven cavity, ensuring consistent cooking results and reduced cooking times.
Wi-Fi Connectivity
SmartThings enabled for remote monitoring and control via smartphone app, allowing you to preheat, monitor cooking, and receive alerts.
FlameFailure Safety
Automatic gas shut-off feature detects when flames go out unexpectedly and cuts off gas supply to prevent dangerous gas buildup.
Easy-Clean Surface
Stainless steel surface with fingerprint-resistant coating makes cleaning simple and maintains the appliance's appearance.
Burner Configuration
Power Burner
18,000 BTU for rapid boiling and high-heat cooking
Dual Burner
12,000/5,000 BTU dual-ring burner for versatile cooking
Standard Burners
Three 9,500 BTU burners for everyday cooking needs
Simmer Burner
5,000 BTU burner for delicate simmering and low-heat cooking
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Burner won't light | Gas supply off, clogged burner ports, ignition issue | Check gas supply, clean burner ports, check ignition electrode |
| Uneven flame | Clogged burner ports, improper air mixture | Clean burner thoroughly, adjust air shutter if accessible |
| Oven not heating | Power issue, gas supply, faulty igniter | Check power and gas supply, inspect oven igniter |
| Gas odor | Gas leak, improper combustion | Immediately turn off gas, ventilate area, check for leaks |
| Electronic display not working | Power issue, faulty control board | Check power supply, reset circuit breaker |
| Oven temperature inaccurate | Faulty thermostat, calibration needed | Use oven thermometer to verify, recalibrate if possible |
Error Codes
- F1: Oven temperature sensor failure - Contact service
- F2: Oven over-temperature - Allow to cool, check for obstructions
- F3: Oven igniter failure - Check igniter, contact service
- F4: Gas supply issue - Check gas valve and supply
- F5: Control board communication error - Reset power
- F7: Surface burner ignition failure - Clean burner, check electrode
Manual Downloads
Current Model Manuals
NX58H9500WS
5.8 cu. ft. Gas Range
NX58H5600SS
5.8 cu. ft. Smart Range
NX58H9500BG
5.8 cu. ft. Black Glass
NX58K7850SG
5.8 cu. ft. Slide-in
Popular Previous Models
NX58F5700WS
5.8 cu. ft. Freestanding
NX58H9500BS
5.8 cu. ft. Black Stainless
NX58K7850SS
5.8 cu. ft. Stainless Steel
NX58F5500SS
5.8 cu. ft. Basic Model